|  | Topic : Rivco Pull Back Risers ( Australia Only) |  |
| | | GerPa | | Jupiter |  |  | | Reg. Date | : | 10/12/2011 | | Posts | : | 1,919 | | Location | : | Mackay, Central Queensland, Australia |
|
| | Posted : 11 Sep 2013 - 08:07 Post title : Rivco Pull Back Risers ( Australia Only) | | | Hello Everyone
I have for sale a Brand New set of Rivco Risers (50mm up by 50mm back) to suit the Thunderbird.They belong to FES and have been in My care for quite a few months. They have a small scratch (Second Picture) on one of them which is barley noticeable and certainly would be mot seen once fitted to the bike unless you knew what you were looking for, they normally sell for around A$ 220.00
I will sell for around $150.00 + Freight which would be about $10.00?
The slight Scratch/Dent (Below)
I have the same risers fitted to My Bike and I luv em  Check out My Album if you want to know what they look like fitted.
|  May-2011-1600, 20306 Tune, Mustang Vintage Solo Seat, Meerkat Cat Bypass, + Meerkat Modified Short TORS  ,K&N Air Cleaner,K&N Oil Filter, JBQ lifting system, Gold Plug Magnetic Sump Plug,Dart Fly screen, Rivco Risers, GiPro Gear Indicator, Breakaway Cruise Control, Avon ISO Grips, Scorpion Western Low Handlebars, Kury Switchblade Pegs, Garmin Zumo390LM,Michelin RC2 on Front RC 3 on ,Modified Rear Drive Pulley Hub Bearings (Mat1600/Alex4 Modification) Front Susp: Std & 7.5W Oil /126mm Air Gap & Rear:Hagon Nitro's with 26Kg/cm Springs + Lots of other "Bling" stuff.
| | Post edited by GerPa on 11 Sep 2013 - 12:09 |
|
| | | GerPa | | Jupiter | | | | Reg. Date | : | 10/12/2011 | | Posts | : | 1,919 | | Location | : | Mackay, Central Queensland, Australia |
|
| | Posted : 11 Sep 2013 - 12:32 Post title : Re: Rivco Pull Back Risers ( Australia Only) (Re: GerPa) | | | Possibly sold.via PM "KeithM". Will confirm.
| May-2011-1600, 20306 Tune, Mustang Vintage Solo Seat, Meerkat Cat Bypass, + Meerkat Modified Short TORS ,K&N Air Cleaner,K&N Oil Filter, JBQ lifting system, Gold Plug Magnetic Sump Plug,Dart Fly screen, Rivco Risers, GiPro Gear Indicator, Breakaway Cruise Control, Avon ISO Grips, Scorpion Western Low Handlebars, Kury Switchblade Pegs, Garmin Zumo390LM,Michelin RC2 on Front RC 3 on ,Modified Rear Drive Pulley Hub Bearings (Mat1600/Alex4 Modification) Front Susp: Std & 7.5W Oil /126mm Air Gap & Rear:Hagon Nitro's with 26Kg/cm Springs + Lots of other "Bling" stuff.
| | Post edited by GerPa on 11 Sep 2013 - 23:13 |
|
| | | GerPa | | Jupiter | | | | Reg. Date | : | 10/12/2011 | | Posts | : | 1,919 | | Location | : | Mackay, Central Queensland, Australia |
|
| | Posted : 12 Sep 2013 - 20:49 Post title : Re: Rivco Pull Back Risers ( Australia Only) (Re: GerPa) | | | Rivco Pullback Risers Sold.
Keith, PM to you with the tracking details.
Rgds
GerryD
| May-2011-1600, 20306 Tune, Mustang Vintage Solo Seat, Meerkat Cat Bypass, + Meerkat Modified Short TORS ,K&N Air Cleaner,K&N Oil Filter, JBQ lifting system, Gold Plug Magnetic Sump Plug,Dart Fly screen, Rivco Risers, GiPro Gear Indicator, Breakaway Cruise Control, Avon ISO Grips, Scorpion Western Low Handlebars, Kury Switchblade Pegs, Garmin Zumo390LM,Michelin RC2 on Front RC 3 on ,Modified Rear Drive Pulley Hub Bearings (Mat1600/Alex4 Modification) Front Susp: Std & 7.5W Oil /126mm Air Gap & Rear:Hagon Nitro's with 26Kg/cm Springs + Lots of other "Bling" stuff.
| | Post edited by GerPa on 13 Sep 2013 - 04:16 |
|
| | | KeithM | | Set | | | Reg. Date | : | 08/09/2013 | | Posts | : | 32 | | Location | : | Toowoomba, Queensland, Australia |
|
| | Posted : 13 Sep 2013 - 06:22 Post title : Re: Rivco Pull Back Risers ( Australia Only) (Re: GerPa) | | | Thanks Gerry, I'm looking forward to getting them 
Regards
Keith
| 
|
|
|
| |
| |
|