|
| jov2002ca | | Set |  |  | | Reg. Date | : | 28/04/2011 | | Posts | : | 141 | | Location | : | Windsor, Ontario, Canada |
|
| | Posted : 02 Jan 2013 - 15:33 Post title : Quick question... | | | Just ordered the chrome lower belt gaurd and had a question about the installation. When reading the install instructions on-line I noticed that quite a few parts (right muffler etc...) needed to be removed. Is this the case, or can this be installed without having to remove anything?
|
|
|
|
| davetac1 | | Thunderbird | | | Reg. Date | : | 06/09/2010 | | Posts | : | 8,379 | | Location | : | Haverhill, Ma., United States |
|
| | Posted : 02 Jan 2013 - 17:14 Post title : Re: Quick question... (Re: jov2002ca) | | | There are only two small allen head screws holding the little chrome cover in the center that hides where the muffler and front pipe come together [then pull the cover straight back towards you and it pops right off] and two bolts that hold the muffler on,a clamp in the front which ya just loosen,and a long bolt in the back which holds the muffler on the frame.Then the muffler just slides back and off.It's a piece of cake. Dave!!!
|
|
|
|
| KiwiTBird | | Set | |  | | Reg. Date | : | 07/01/2012 | | Posts | : | 86 | | Location | : | Vic, Australia |
|
| | Posted : 27 Nov 2013 - 08:32 Post title : Re: Quick question... Another quick one | | | how do you remove the Radiator cowl need to get the bugs out of the fins, as taking bike out of the country. please
|  Take it easy But Take it
|
|
|
|
| Leethal | | Zeus | |  | | Reg. Date | : | 24/01/2011 | | Posts | : | 6,593 | | Location | : | Australia |
|
| | Posted : 27 Nov 2013 - 09:48 Post title : Re: Quick question... Another quick one (Re: KiwiTBird) | | | Under the cowl on the bottom is one allen head screw, remove that then the cowl lifts off at the top. You need to get down low to see the screw.
| Experience is something you get just after you needed it 
1600,Foran Razorbacks, Meerkat bypass, Dyno tune, real headlight,plenty of chrome,switchblade pegs, Nitron R3 shocks & Ikon progressive fork springs etc. Scorpion Western Low handlebars. PH adjustable fork caps.
|
|
|
|
| magpie | | Jupiter | |  | | Reg. Date | : | 12/02/2011 | | Posts | : | 1,507 | | Location | : | NSW, Australia |
|
| | Posted : 27 Nov 2013 - 10:24 Post title : Re: Quick question... Another quick one (Re: Leethal) | | |
Wayne,
As Lee said it's only one Allen bolt.
The question is .....how low can you go ?
Magpie
| Magpie - "I dream of a better world.....where chickens can cross the road without having their motives questioned "
|
|
|
|
| KiwiTBird | | Set | | | | Reg. Date | : | 07/01/2012 | | Posts | : | 86 | | Location | : | Vic, Australia |
|
| | Posted : 28 Nov 2013 - 06:51 Post title : Re: Quick question... Another quick one (Re: magpie) | | | Hi gents many thanks for your help.. I must say I did not get that low for the fear that I would not make it back up again
thanks again
| Take it easy But Take it
| | Post edited by KiwiTBird on 28 Nov 2013 - 06:52 |
|
|